Trimmed Old-Fashioned Three-Way Push-Button 600 Watt Light Switch Dimmer

Keep the architectural look and feel of Arts & Crafts or Victorian era homes with this authentic reproduction dimming light switch. Specifically designed for installation next to another dimmer, ceiling fan control or GFCI outlet. Three way devices control one light from two locations.

• 3 way push-button light dimmer switch with synthetic mother of pearl inlay in both buttons for use when installed next to other dimmers, etc.
• Top button pushes on and off and bottom button rotates to increase or decrease light intensity.

Narrow Antique Reproduction 3 Way 600W Push Button Light Switch Dimmers

• Functionality: Narrow cut 600 watts (limited to 400 watts) - 120 Volts 3-way device for incandescent lights that works with both existing and new wiring. Use this trimmed version when installing next to another dimmer or other non-mechanical on-off type switch. Upper switch clicks when pushed on or off, lowers twists to dim. Weighs 2.9 ounces. Made in Taiwan.
• Technical: Use these trimmed dimmers when you need to mount next to another dimmer in a multi gang electrical box. Also use when installing next to an electrical device that isn't a mechanical on-off type switch such as a GFCI outlet or ceiling fan control. Trimming a dimming switch reduces the amount of wattage it can handle down to 400 watts. The flange or casing around the dimmer is designed to dissipate heat. When trimmed, the narrower flange limits the amount of heat that can be dissipated thereby reducing the amount of wattage the device can handle. You do not need a trimmed dimmer if mounting next to a regular switch or duplex receptacle.
• Low Voltage Lighting Systems: These dimmers will work with electronic low voltage light systems if they are installed before the transformer in the circuit. The dimmers will not work with magnetic low voltage systems.
• Important: Do NOT use on Fluorescent fixtures or fans. For permanent fixtures only. However you can use them with dimmable CF (compact fluorescent) or LED bulbs that are compatible with rheostat dimming switches.
• Which Wattage Dimmer To Choose: Add up the wattage used on the light bulbs the trimmed device will control. If the total is more than 200 watts, then choose the 600 watt (400 watt derated) dimmer. If it is less than 200 watts then the 300 watt (200 watt derated) dimmer will be adequate.
• Installation: Old fashion snap style switches. Fits standard electrical boxes. All necessary mounting hardware is included.
• Perfect solution for renovators of historic homes or to create the look of a house with antique hardware.
• Shopping online for classic accents for an older home? Renovating? Remodeling? Starting new construction but want the traditional look of an historical home? Click Push Button Switch Plates and Devices for our full selection of light switch coverplates in a wide range of metal finishes, plus switches and dimmers for push buttons.

Kyle Design carries one of the largest selections of light switch wall plate sizes. In addition to rare push-buttons, we stock all those hard-to-find sizes, unusual configurations and odd switchplate shapes, plus the old style electrical devices to go with them. To see our full collection, visit Classic Light Switch Plates in All Sizes for our full selection of light switch plates, outlet covers, dimmer panels plus matching hardware and accessories.

Ships in 1 - 2 business days. Flat rate ground. Need it faster? Air Shipping & Delivery  •  Returns & Exchanges