Vintage Pushbutton Light Switches with Colorful Button Overlays

Keep the architectural look and feel of turn-of-the-century Victorian or Arts & Crafts era houses with this authentic reproduction push button light switch that has color-coordinated aluminum button caps on the end of both knobs.

• Devices: Choice of single pole push button light switch, 3 way switch (controls one light from 2 locations), 4 way switch (controls 1 light from 3 locations), dual switch for two lights with each button controlling one by pushing on and off, or 300W dimmer, 600W dimmer, 3 way dimmers and narrow trimmed dimmers for use when installed next to each other.
• Colored aluminum on both top and bottom buttons. A wonderful way to bring color to a room or to coordinate with face plate covers. Cover plates not included.

Additional Device Details

• Aluminum Colors Choices: Black, Silver, Bronze, Light Olive, Yellow, Teal, Lime Green, Green, Forest Green, Citrus, Turquoise, Blue, Aquamarine, Pink, Berry, Fuchsia, Violet, Orchid and Red. Anodized aluminum has a smooth satin finish.
• Finishing Accent: Beautiful solution for coordinating with decorative pushbutton plates in a range of colors. Great, stylish option for renovators of historical homes built between the 1900's to 1950's. Creates and adds a traditional look to a house with antique hardware.
• Push Button Light Switch Plates: Remodeling? Renovating? Building a new home but want a classic accent or an historical look? Click Push Button Switch Plates and Devices for our full selection of light switch plates, switches and dimmers for push buttons.
• Single Pole Switch: 15 Amps - 125 Volts - 60 Hz single station device that works with both existing and new wiring. Clicks when pushed on or off. Weighs 3.2 ounces.
• 3 Way Switch: Three way push button light switch for controlling one light from two different locations. Two station device. Clicks when pushed on or off. Weighs 3.4 ounces.
• Ratings: UL Listed (except for 4-way switch) and CSA (Canadian Safety Association) Certified.
• 4 Way Switch: Four way push button light switch for controlling one light from three different locations. 15 Amps - 125 Volts - 60 Hz three o more station device. Clicks when pushed on or off. Weighs 3.4 ounces.
• Dual Single Pole Device Switch: Single pole double push button light switch controls two separate lights by pushing each knob in and out. 15 Amps - 125 Volts - 60 Hz single station device. Weighs 3.7 ounces.
• 3-Way Dual Device Switch: Three way double push button light switch controls two separate lights from two different locations by pushing each knob in and out. 15 Amps - 125 Volts - 60 Hz two station device. Weighs 3.7 ounces.
• 300W Dimmer: Top button pushes on and off and bottom button rotates to increase or decrease light intensity. 300 Watts - 120 Volts single station device for incandescent lights that works with both existing and new wiring. Clicks when pushed on or off. Weighs 2.9 ounces. UL listed. May be ganged with non-dimming switches with no loss of output. (If you need to mount next to another dimmer, a GFCI outlet or a ceiling fan control, the device must be trimmed. This would result in a reduction of the amount of wattage it can safely handle down to 200 watts. Select Trimmed Width from drop down menu.) Side wired with grounding screw. Do not use on Fluorescent fixtures or fans.
• 3 Way 300W Dimmer: Top button pushes on and off and bottom button rotates to increase or decrease light intensity. 300 Watts - 120 Volts two station device for incandescent lights that works with both existing and new wiring. Clicks when pushed on or off. Weighs 2.9 ounces. UL listed. May be ganged with non-dimming switches with no loss of output. (If you need to mount next to another dimmer, a GFCI outlet or a ceiling fan control, the device must be trimmed. This would result in a reduction of the amount of wattage it can handle from 300 watts down to 200 watts. Select Trimmed Width from drop down menu.) Side wired with grounding screw. Do not use on Fluorescent fixtures or fans.
• 600W Dimmer: Top button pushes on and off and bottom button rotates to increase or decrease light intensity. 600 Watts - 125 Volts single station device for incandescent lights that works with both existing and new wiring. Clicks when pushed on or off. Weighs 2.9 ounces. UL listed. May be ganged with non-dimming switches with no loss of output. (If you need to mount next to another dimmer, a GFCI outlet or a ceiling fan control, the device must be trimmed. This would result in a reduction of the amount of wattage it can handle from 600 watts down to 400 watts. Select Trimmed Width from drop down menu.) Side wired with grounding screw. Do not use on Fluorescent fixtures or fans.
• 3 Way 600W Dimmer: Top button pushes on and off and bottom button rotates to increase or decrease light intensity. 600 Watts - 125 Volts two station device for incandescent lights that works with both existing and new wiring. Clicks when pushed on or off. Weighs 2.9 ounces. UL listed. May be ganged with non-dimming switches with no loss of output. (If you need to mount next to another dimmer, a GFCI outlet or a ceiling fan control, the device must be trimmed. This would result in a reduction of the amount of wattage it can handle from 600 watts down to 400 watts. Select Trimmed Width from drop down menu.) Side wired with grounding screw. Do not use on Fluorescent fixtures or fans.
• Which Wattage Dimmer To Choose: Add up the wattage used on the light bulbs the trimmed device will control. If the total is more than 300 watts, then choose the 600 watt dimmer. If it is less than 300 watts then the 300 watt dimmer will be adequate. If you are installing next to another dimmer, a GFCI outlet or a ceiling fan control and the total is more than 200 watts, then choose the 600 watt (400 watt derated) dimmer. If it is less than 200 watts then the 300 watt (200 watt derated) dimmer will be adequate.
• Low Voltage Dual Momentary: Two momentary switches on one housing for controlling two devices. These switches are low voltage dual momentary switches. These switches can be used with computer controlled lighting systems or with garage door openers. Switches click on and off.
• Features: UL Listed and CSA Certified. Devices work with both new and existing wiring. Made in Taiwan. Fits standard electrical boxes. All necessary mounting hardware is included. Aluminum accents made in USA.

Kyle Design carries one of the largest selections of light switch plate sizes. We stock all those hard-to-find sizes, unusual configurations and odd switchplate shapes, plus the old style electrical devices to go with them. To see our full collection, visit Classic Light Switch Plates in All Sizes for our full selection of light switch plates, outlet covers, dimmer panels plus matching hardware and accessories.

Ships in 1 - 2 business days. Flat rate ground. Need it faster? Air Shipping & Delivery  •  Returns & Exchanges