Satin Brown Child Safe 15A GFCI or GFI Decora Receptacle 1595TR

• Features: Advanced SafeLock Protection shuts off power to the receptacle if theres a ground fault, if the GFCI is miswired, and even if the GFCI fails.
• Uses - Designed specifically residential homes, apartment buildings, extended stay hotels, nursing homes, assisted living facilities or any dwelling units where electrical injuries to children could be a concern.
• Size and Finish: Fits standard size decor style block or rocker opening light switchplates. Satin finish. Matching plastic switch plate included. Pass & Seymour 1595TR

• Electrical Switches, Power Outlets: Click Brown Electrical Supplies and Devices for additional electrical light switches, outlets, rockers and dimmers.
• Mahogany Brown Wall Plates: Click Brown Light Switch Wall Plates for coordinating switch and outlet covers.
• Safety and Convenience: These innovative decorator receptacles are safer than plastic outlet plug caps which one can easily forget to replace and more convenient than sliding shutter plates. (Note: shuttered wall plates are no longer UL-listed due to heat-related safety concerns.) Safer than safety caps which can be a choking hazard. Tamper resistant outlets require no adult action to maintain safety and are a proven safety solution that prevent painful injuries.
• NEC and CEC Requirements: Required in new residential construction by the 2008 National Electrical Code (NEC) and the 2009 Canadian Electrical Code (CEC). UL listed.
• Award Winning: Pass & Seymour/Legrand (P&S) Tamper-Resistant Receptacles received the Home Safety Council's* Commendation Award for Product Innovation for Consumer Safety in 2006.
• SafeLock Protection denies power if the GFCI is miswired or if the GFCI is damaged and protection is lost. This prevents the unsafe condition of power without protection.
• Description: Straight Blade Duplex Tamper-Resistant GFCI Receptacle, Type: 2 Pole, 3 Wire Grounding, Rating: 20A, 125VAC Feed Thru, 15A, 125VAC or 20A, 125VAC FACE
• 3rd Party Compliance: cULus Listed, File Number E42190; Standard UL498 Tamper-Resistant Attachment Plugs and Receptacles UL943 GFCIs. Federal Specification WC596. Standard CSA-C22.2 No. 42, General Use Receptacles, CSA-C22.2 No. 144 GFCIs, Conforms to NEMA WD-1 and WD-6.
• Electrical: Dielectric Withstands 1500V minimum, Trip Level 4 to 6 mA Trip Time .025 Second Nominal, Frequency 60 Hz, Voltage 125VAC, Voltage Range 102-132VAC.
• Mechanical: Indicator Light (LED) Red, ON when GFCI is tripped, Terminal Identification Terminals identified in accordance with UL498 (Hot, White, Green), Terminal Accommodation #14 #10 AWG solid or stranded copper conductor only, Product Identification Ratings are a permanent part of device.
• Environmental: Operating Temperature -35C to +66C, Maximum Humidity 95%, Flammability UL94 V2.
• Materials: Face Nylon, Body Nylon, Contacts .03" Brass (.8), Mounting Straps .05" Zinc-Plated Steel (1.3), Terminal Screws Steel #8 - 32, Hex Head Grounding Screw Steel (Green), Flat Head Mounting Screws Zinc-Plated Steel, Test/Reset Buttons Nylon, Tamper-Resistant Shutter Thermoplastic.
• Nickel post-plated mounting strap for superior corrosion resistance.
• Trip indicator light (red lamp) makes it easy to identify tripped condition.
• Side or internal screwpressure-plate back wire termination with #14 #10 AWG stranded or solid, copper or copper-clad conductors.
• Captive screws make for easier installation. Screw-pressure-plate back and side wiring for fast, easy installation.
• Back wire clamp allows for fast installation of ground wires.
• Two back wire holes per termination add wiring flexibility, eliminate pigtailing and save box space.
• Prevents line-load reversal miswire: No power to the face or downstream receptacles if wired incorrectly.
• High-impact-resistant, thermoplastic construction for superior strength and durability.
• 1/4 thinner than competitors GFCIs; leaves more room for wires in the box.
• #14 AWG #10 AWG solid or stranded copper conductor only.
• Supplied with matching TP26 nylon wall plate.